Brc Food Safety And Quality Management System

Updated: over a week ago

BRC - Food Safety And Quality Management System

Food Safety And Quality Manual Food Safety

1. The site’s procedures, working methods and practices shall be collated in the form of a printed or electronic quality manual


Photo Comment

2. The food safety and quality manual shall be fully implemented and the manual or relevant components shall be readily available to relevant staff.


Photo Comment

3. All procedures and work instructions shall be clearly legible, unambiguous, in appropriate languages and sufficiently detailed to enable their correct application by appropriate staff. This shall include the use of photographs, diagrams or other pictorial instructions where wrien communication alone is not sufficient (e.g. there are issues of literacy or foreign language).


Photo Comment
Document Control

1. The company shall have a procedure to manage documents which form part of the food safety and quality system. This shall include: • a list of all controlled documents indicating the latest version number • the method for the identification and authorisation of controlled documents • a record of the reason for any changes or amendments to documents • the system for the replacement of existing documents when these are updated. Where documents are stored in electronic form these shall also be: • stored securely (e.g. with authorised access, control of amendments, or password protected) • backed up to prevent loss.


Photo Comment
Record Completion And Maintenance

1. Records shall be legible, maintained in good condition and retrievable. Any alterations to records shall be authorised and justification for the alteration shall be recorded. Where records are in electronic form these shall also be: • stored securely (e.g. with authorised access, control of amendments, or password protected) • suitably backed up to prevent loss.


Photo Comment

2. Records shall be retained for a defined period with consideration given to: • any legal or customer requirements • the shelf life of the product. This shall take into account, where it is specified on the label, the possibility that shelf life may be extended by the consumer (e.g. by freezing). At a minimum, records shall be retained for the shelf life of the product plus 12 months.


Photo Comment
Internal Audits

1. There shall be a scheduled programme of internal audits. At a minimum, the programme shall include at least four different audit dates spread throughout the year. The frequency at which each activity is audited shall be established in relation to the risks associated with the activity and previous audit performance. All activities shall be covered at least once each year. At a minimum, the scope of the internal audit programme shall include the: • HACCP or food safety plan, including the activities to implement it (e.g. supplier approval, corrective actions and verification) • prerequisite programmes (e.g. hygiene, pest control) • food defence and food fraud prevention plans • procedures implemented to achieve the Standard. Each internal audit within the programme shall have a defined scope and consider a specific activity or section of the HACCP or food safety plan.


Photo Comment

2. Internal audits shall be carried out by appropriately trained, competent auditors. Auditors shall be independent (e.g. not audit their own work).


Photo Comment

3. The internal audit programme shall be fully implemented. Internal audit reports shall identify conformity as well as non-conformity and include objective evidence of the findings. The results shall be reported to the personnel responsible for the activity audited. Corrective and preventive actions, and timescales for their implementation, shall be agreed and their completion verified.


Photo Comment

4. In addition to the internal audit programme, there shall be a separate programme of documented inspections to ensure that the factory environment and processing equipment are maintained in a suitable condition for food production. At a minimum, these inspections shall include: • hygiene inspections to assess cleaning and housekeeping performance • fabrication inspections to identify risks to the product from the building or equipment. The frequency of these inspections shall be based on risk but will be no less than once per month in open product areas.


Photo Comment
Management Of Suppliers Of Raw Materials

1. The company shall undertake a documented risk assessment of each raw material or group of raw materials including primary packaging to identify potential risks to product safety, legality and quality. This shall take into account the potential for: • allergen contamination • foreign-body risks • microbiological contamination • chemical contamination • variety or species cross-contamination • substitution or fraud (see clause 5.4.2) • any risks associated with raw materials which are subject to legislative control. Consideration shall also be given to the significance of a raw material to the quality of the final product. The risk assessment shall form the basis for the raw material acceptance and testing procedure and for the processes adopted for supplier approval and monitoring. The risk assessment for a raw material shall be updated: • when there is a change in a raw material, the processing of a raw material, or the supplier of a raw material


Photo Comment

2. The site shall have an up-to-date list or database of approved suppliers. This may be on paper (hard copy) or it may be controlled on an electronic system. The list or relevant components of the database shall be readily available to the relevant staff (e.g. at goods receipt).


Photo Comment

3. The company shall have a documented supplier approval procedure to ensure that all suppliers of raw materials, including primary packaging, effectively manage risks to raw material quality and safety and are operating effective traceability processes. The approval procedure shall be based on risk and include either one or a combination of: • a valid certification to the applicable BRC Global Standard or GFSI-benchmarked standard. The scope of the certification shall include the raw materials purchased • supplier audits, with a scope to include product safety, traceability, HACCP review and good manufacturing practices, undertaken by an experienced and demonstrably competent product safety auditor. Where the supplier audit is completed by a second or third party, the company shall be able to: – demonstrate the competency of the auditor – confirm that the scope of the audit includes product safety, traceability, HACCP review and good manufacturing practices...


Photo Comment

4. There shall be a documented process for ongoing supplier performance review, based on risk and defined performance criteria. The process shall be fully implemented. Where approval is based on questionnaires, these shall be reissued at least every 3 years and suppliers shall be required to notify the site of any significant changes in the interim, including any change in certification status. Records of the review shall be kept.


Photo Comment

5. Where raw materials (including primary packaging) are purchased from companies that are not the manufacturer, packer or consolidator (e.g. purchased from an agent, broker or wholesaler), the site shall know the identity of the last manufacturer or packer, or for bulk commodity products the consolidation place of the raw material. Information to enable the approval of the manufacturer, packer or consolidator, as in clauses 3.5.1.1 and 3.5.1.2, shall be obtained from the agent/broker or directly from the supplier, unless the agent/broker is themselves certificated to a BRC Global Standard (e.g. BRC Global Standard for Agents and Brokers) or a standard benchmarked by GFSI.


Photo Comment

6. The procedures shall define how exceptions to the supplier approval processes in clause 3.5.1.2 are handled (e.g. where raw material suppliers are prescribed by a customer) or where information for effective supplier approval is not available (e.g. bulk agricultural commodity products) and instead product testing is used to verify product quality and safety. When a site produces customer-branded product, the customer shall be made aware of the relevant exceptions.


Photo Comment

7. The company shall ensure that its suppliers of raw materials (including primary packaging) have an effective traceability system. Where a supplier has been approved based on a questionnaire instead of certification or audit, verification of the supplier’s traceability system shall be carried out on first approval and then at least every 3 years. This may be achieved by a traceability test. Where a raw material is received directly from a farm or fish farm, further verification of the farm’s traceability system is not mandatory


Photo Comment
Raw Material And Packging Acceptance, Monitoring

1. The company shall have a procedure for the acceptance of raw materials and primary packaging on receipt based upon the risk assessment (clause 3.5.1.1). Acceptance of raw materials (including primary packaging) and their release for use shall be based on either one or a combination of: • product sampling and testing • visual inspection on receipt • certificates of analysis (specific to the consignment) • certificates of conformance. A list of raw materials (including primary packaging) and the requirements to be met for acceptance shall be available. The parameters for acceptance and frequency of testing shall be clearly defined, implemented and reviewed.


Photo Comment

2. Procedures shall be in place to ensure that approved changes to raw materials (including primary packaging) are communicated to goods receipt personnel and that only the correct version of the raw material is accepted. For example, when labels or printed packaging have been amended, only the correct version should be accepted and released into production.


Photo Comment

3. Where the site is in receipt of live animals, there shall be an inspection by a suitably competent individual at lairage and post mortem to ensure that the animals are fit for human consumption.


Photo Comment
Management Of Suppliers Of Services

1. There shall be a procedure for the approval and monitoring of suppliers of services. Such services shall include, as appropriate: • pest control • laundry services • contracted cleaning • contracted servicing and maintenance of equipment • transport and distribution • off-site storage of ingredients, packaging or products • off-site packing of products • laboratory testing • catering services • waste management. This approval and monitoring process shall be risk-based and take into consideration: • risk to the safety and quality of products • compliance with any specific legal requirements • potential risks to the security of the product (i.e. risks identified in the vulnerability and food defence assessments).


Photo Comment

2. Contracts or formal agreements shall exist with the suppliers of services that clearly define service expectations and ensure that the potential food safety risks associated with the service have been addressed.


Photo Comment
Management Of OutSourced Processing

1. The company shall be able to demonstrate that, where part of the production process or any part of the final packing is outsourced and undertaken off-site, this has been declared to the brand owner and, where required, approval granted.


Photo Comment

2. The company shall ensure that outsourced processors are approved and monitored, to ensure that they effectively manage risks to product safety and quality and are operating effective traceability processes. The approval and monitoring procedure shall be based on risk and include either one or a combination of: • a valid certification to the applicable BRC Global Standard or GFSI-benchmarked standard. The scope of the certification shall include the raw materials purchased


Photo Comment

3. Any outsourced processing operations shall: • be undertaken in accordance with established contracts which clearly define any processing and/or packing requirements and product specification • maintain product traceability


Photo Comment

4. The company shall establish inspection and test procedures for products where part of the processing has been outsourced, including visual, chemical and/or microbiological testing. The frequency and methods of inspection or testing shall depend on risk assessment.


Photo Comment
Specifications

1. Specifications for raw materials and primary packaging shall be adequate and accurate and ensure compliance with relevant safety and legislative requirements. The specifications shall include defined limits for relevant aributes of the material which may affect the quality or safety of the final products (e.g. chemical, microbiological or physical standards).


Photo Comment

2. Accurate, up-to-date specifications shall be available for all finished products. These may be in the form of a printed or electronic document, or part of an online specification system. They shall include key data to meet customer and legal requirements and assist the user in the safe usage of the product.


Photo Comment

3. Where the company is manufacturing customer-branded products, it shall seek formal agreement of the finished product specifications. Where specifications are not formally agreed then the company shall be able to demonstrate that it has taken steps to ensure formal agreement is in place.


Photo Comment

4. Specification review shall be sufficiently frequent to ensure that data is current or at a minimum every 3 years, taking into account product changes, suppliers, regulations and other risks. Reviews and changes shall be documented


Photo Comment
Corrective And Preventive Actions

1. The site shall have a procedure for handling and correcting failures identified in the food safety and quality management system.


Photo Comment

2. Where a non-conformity places the safety, legality or quality of products at risk, this shall be investigated and recorded including: • clear documentation of the non-conformity • assessment of consequences by a suitably competent and authorised person • the action to address the immediate issue • an appropriate timescale for correction • the person responsible for correction • verification that the correction has been implemented and is effective.


Photo Comment

3. The site shall have a procedure for the completion of root cause analysis. At a minimum root cause analysis shall be used to implement ongoing improvements and to prevent recurrence of non-conformities when: • analysis of non-conformities for trends shows there has been a significant increase in a type of non-conformity • a non-conformity places the safety, legality or quality of a product at risk.


Photo Comment
Control Of Non-Conforming Product

1. There shall be procedures for managing non-conforming products. These procedures shall include: • the requirement for staff to identify and report a potentially non-conforming product • clear identification of a non-conforming product (e.g. direct labelling or the use of IT systems) • secure storage to prevent accidental release (e.g. physical or computer-based isolation) • referral to the brand owner where required • defined responsibilities for decision-making on the use or disposal of products appropriate to the issue (e.g. destruction, reworking, downgrading to an alternative label or acceptance by concession) • records of the decision on the use or disposal of the product • records of destruction where a product is destroyed for food safety reasons.


Photo Comment
Traceability

1. The site shall have a documented traceability procedure designed to maintain traceability throughout the site’s processes. At a minimum this shall include: • how the traceability system works • the labelling and records required


Photo Comment

2. Identification of raw materials (including primary packaging), intermediate/semi-processed products, part-used materials, finished products and materials pending investigation shall be adequate to ensure traceability.


Photo Comment

3. The site shall test the traceability system across the range of product groups to ensure traceability can be determined from the supplier of raw material (including primary packaging) to the finished product and vice versa, including quantity check/mass balance. The traceability test shall include a summary of the documents that should be referenced during the test, and clearly show the links between them. The test shall occur at a predetermined frequency, at a minimum annually, and results shall be retained for inspection. Traceability should be achievable within 4 hours.


Photo Comment

4. Where rework or any reworking operation is performed, traceability shall be maintained.


Photo Comment
Complaint-Handling

1. All complaints shall be recorded, investigated and the results of the investigation of the issue recorded where sufficient information is provided. Actions appropriate to the seriousness and frequency of the problems identified shall be carried out promptly and effectively by appropriately trained staff.


Photo Comment

2. Complaint data shall be analysed for significant trends. Where there has been a significant increase in a complaint or a serious complaint, root cause analysis shall be used to implement ongoing improvements to product safety, legality and quality, and to avoid recurrence. This analysis shall be made available to relevant staff.


Photo Comment
Management Of Incidents, Product Withdrawal

1. The company shall have procedures designed to report and effectively manage incidents and potential emergency situations that impact food safety, legality or quality. This shall include consideration of contingency plans to maintain product safety, quality and legality. Incidents may include: • disruption to key services such as water, energy, transport, refrigeration processes, staff availability and communications • events such as fire, flood or natural disaster • malicious contamination or sabotage • failure of, or aacks against, digital cyber-security. Where products which have been released from the site may be affected by an incident, consideration shall be given to the need to withdraw or recall products.


Photo Comment

2. The company shall have a documented product withdrawal and recall procedure. This shall include, at a minimum: • identification of key personnel constituting the recall management team, with clearly identified responsibilities • guidelines for deciding whether a product needs to be recalled or withdrawn and the records to be maintained • an up-to-date list of key contacts (including out-of-hours contact details) or reference to the location of such a list (e.g. recall management team, emergency services, suppliers, customers, certification body, regulatory authority) • a communication plan including the provision of information to customers, consumers and regulatory authorities in a timely manner • details of external agencies providing advice and support as necessary (e.g. specialist laboratories, regulatory authority and legal expertise)


Photo Comment

3. The product recall and withdrawal procedures shall be tested, at least annually, in a way that ensures their effective operation. Results of the test shall be retained and shall include timings of key activities. The results of the test and of any actual recall shall be used to review the procedure and implement improvements as necessary.


Photo Comment

4. In the event of a significant food safety incident, including a product recall or regulatory food safety non-conformity (e.g. a regulatory enforcement notice), the certification body issuing the current certificate for the site against this Standard shall be informed within 3 working days.


Photo Comment

Is this sample what you are looking for?
Sign up to use & customise this template, or create your own custom checklist:

Checklist by GoAudits.com – Please note that this checklist is intended as an example. We do not guarantee compliance with the laws applicable to your territory or industry. You should seek professional advice to determine how this checklist should be adapted to your workplace or jurisdiction.

goaudits app

Get started on a free trial

Seeing is believing! Try the full platform FREE for 14 days with your own data.
Or ask us to setup the system for you, at no cost.