SWPPP Inspection Checklist

Use this SWPPP Inspection Checklist to comply with stormwater management practices, ensuring proper erosion control, sediment tracking, and site drainage.

Download as free PDF

Library
Health & Safety
SWPPP Inspection Checklist

Stormwater Pollution Prevention Plans

Objective – Keep Any Sediment On The Site

Objective – Non-Stormwater Concerns

Objective – In Summary

Effective Erosion And Sediment Control

Is this sample what you are looking for?
Sign up to use & customise this template, or create your own custom checklist:

Checklist by GoAudits.com – Please note that this checklist is intended as an example. We do not guarantee compliance with the laws applicable to your territory or industry. You should seek professional advice to determine how this checklist should be adapted to your workplace or jurisdiction.

Easy inspection app for your digital checklists

Conduct inspections anytime, anywhere - even offline
Capture photos as proof of compliance or areas needing attention
Instantly generate and share detailed reports after the inspections
Assign & track follow-up tasks, view historical trends on a centralized dashboard

SWPPP Inspection Checklist

Use this SWPPP Inspection Checklist to comply with stormwater management practices, ensuring proper erosion control, sediment tracking, and site drainage.

1. Are plans located on-site or at the approved designated area?

2. Are site controls listed in the SWPPP in place?

3. Is the project schedule being followed?

1. Are controls at all down-slope perimeters in place?

2. Are soil stockpiles in appropriate locations and covered, mulched, or vegetated?

3. Is any on-site traffic properly routed, with parking and storage restricted to designated areas?

4. Are all sediments, mud, and debris being kept off public roads?

5. Are provisions in place to prevent mud tracking off-site?

1. Is concrete washout contained with locations clearly marked and maintained?

2. Are materials, supplies, chemicals, portable toilets, fuel tanks, paints, solvents, and trash in approved areas protected from erosion or spills?

3. Are clean-out, storage, and maintenance areas for material handling equipment clean and free of spills and leaks?

1. Are erosion and sediment control devices in place and functioning according to the SWPPP?

2. Is the site stabilized at this time?

1. Is the construction entrance stabilized?

2. Is temporary seeding in place?

3. Is permanent seeding in place?

4. Is sodding in place?

5. Is mulching in place?

6. Is the silt fence properly installed and maintained?