HVAC Commissioning Checklist

Use the HVAC Commissioning Checklist to inspect the refrigerant change, indoor airflow, and air balancing ensuring optimal performance of HVAC systems.

HVAC Commissioning Checklist



Testing, Adjusting, And Balancing (TAB)

1. Is the terminal maximum airflow set verified?


Photo Comment

2. Is the terminal minimum airflow set verified?


Photo Comment

3. Is the TAB (Testing, Adjusting, and Balancing) operation completed?


Photo Comment
Coils

1. Is the chilled water piping properly connected?


Photo Comment

2. Is the chilled water piping pressure tested?


Photo Comment

3. Is the hot water piping properly connected?


Photo Comment

4. Is the hot water piping pressure tested?


Photo Comment

5. Are air vents installed on water coils with shutoff valves as specified?


Photo Comment

6. Is any damage to the coil fins repaired?


Photo Comment
Heat Recovery Unit

1. Are the controls operable?


Photo Comment

2. Is the power connected, and the rotation checked?


Photo Comment

3. Are the bypass dampers operable?


Photo Comment
Programmable Thermostats

1. Is the installation carried out according to the manufacturer's instructions?


Photo Comment

2. Is the programming done according to the designed control strategy?


Photo Comment

3. Is the heating operation verified during occupied periods?


Photo Comment

4. Is the heating operation verified during unoccupied periods?


Photo Comment

5. Is the cooling operation verified during occupied periods?


Photo Comment

6. Is the cooling operation verified during unoccupied periods?


Photo Comment

7. Is the system operation verified during occupied hours under no-load conditions?


Photo Comment

8. Is the system operation verified during unoccupied hours under no-load conditions?


Photo Comment

9. Is the system status verified when power is lost?


Photo Comment

10. Is the system operation verified when power is returned?


Photo Comment

11. Is the battery backup verified?


Photo Comment

12. Are the room temperatures measured for compliance with the set point?


Photo Comment
Installation

1. Is the refrigerant pipe leak tested?


Photo Comment

2. Is the refrigerant pipe evacuated and charged following the manufacturer's instructions?


Photo Comment

3. Are the condenser fans for proper rotation checked?


Photo Comment

4. Is the damage to the coil fins repaired?


Photo Comment

5. Is the manufacturer's required maintenance/operational clearance provided?


Photo Comment
Electrical

1. Is power available to the unit disconnected?


Photo Comment

2. Is power available to the unit control panel?


Photo Comment

3. Is the power disconnect verified to be located within sight of the unit it controls?


Photo Comment
Controls

1. Are the safety/protection devices of the unit tested?


Photo Comment

2. Are the control system and interlocks installed?


Photo Comment

3. Are the control system and the interlocks operational?


Photo Comment

Is this sample what you are looking for?
Sign up to use & customise this template, or create your own custom checklist:

Checklist by GoAudits.com – Please note that this checklist is intended as an example. We do not guarantee compliance with the laws applicable to your territory or industry. You should seek professional advice to determine how this checklist should be adapted to your workplace or jurisdiction.

Seeing is Believing

Get a live demo customized to your unique needs, or get started with a 14-day FREE trial.