Electric Furnace Maintenance Checklist

Are the air filters replaced with the manufacturer-recommended size?

Is a safety carbon monoxide air test performed?

Are the burner and combustion sections cleaned?

Are the burners adjusted and aligned with the manifold?

Are the gas valve and manifold pressures checked and adjusted?

Are all electrical components and connections inspected?

Is the pilot safety solenoid checked?

Is the ignition safety control checked?

Are the electronic sparking devices inspected and adjusted?

Are all safety shutdown controls tested?

Are the temperature controllers inspected and adjusted?

Are the draft and chimney pressures measured?

Is the blower section inspected?

Are all motor and shaft bearings lubricated?

Are indoor motor amperes monitored?

Are all damper assemblies checked and lubricated?

Are the inlet and outlet system temperatures monitored?

Are all findings and recommendations documented?