Construction Quality Inspection

An audit checklist to inspect the quality of construction foundation pre-pour and post-pour, frames, doors, windows, etc.

Construction Quality Inspection



50 questions in 3 sectionsInteractive preview: try the answers

Section 1 of 3 · 6 questions

Post-Pour

  1. Does Framing correspond to Foundation?

  2. Honeycombs in the foundation?

  3. Foundation level, with 2" tolerance front to back?

  4. Overall neighborhood appearance

  5. Flatwork complete ( Rear Patio) ?

  6. Lot clean and fresh of trash?

Section 2 of 3 · 9 questions

Pre-Pour

  1. Dimensions Consistent with Elevations, Selections and Change orders?

  2. Beams/footings clear of water and debris? 20" wide?

  3. Poly installed properly?

  4. Island conduit installed ( if applicable )?

  5. Water meter Installed?

  6. Temporary electric meter installed?

  7. All Inspections Clear?

  8. Lot clean and fresh of trash?

  9. Overall Neighborhood appearance

Section 3 of 3 · 35 questions

Shear Wall, Windows, Doors

  1. Is the lumber the correct grade as specified on the plans?

  2. Is all hardware installed as per the engineer's specs?

  3. Are the correct trusses installed per the engineered layout?

  4. Is the lumber installed and spaced correctly?

  5. Are all anchor bolts installed correctly and spaced properly?

  6. Do all point load points have a direct traceable bearing to the slab?

  7. Are all fire stops and blocking installed?

  8. Does the house match the elevation drawings on all sides of the house?

  9. Are the correct nails used on all framing members?

  10. Is the roof sheathing installed and nailed correctly?

  11. Only treated materials in contact with masonry?

  12. Proper nailing, glue of sub floor? No squeaks?

  13. Fully supported seams in the sub floor. No sagging or weak spots?

  14. All hangers installed properly. Nails in all required holes?

  15. No bowed walls (check all plumbing, and stud shoes)

  16. Wet walls where needed?

  17. Are wall sheathing nail patterns consistent with IRC regulations 3” & 6”

  18. Proper ventilation space left in gables and ridge for air flow

  19. Ply wood clips in place

  20. All options included in Framing (fireplaces, islands, vaults, trey,)

  21. Are all strong backs in place and diagonals tied in?

  22. 1/8 inch OSB spacing?

  23. Exterior load bearing walls 16” OC?

  24. Garage Rough Openings correct?

  25. Check all rough door and window openings.

  26. All crickets built?

  27. All interior walls plumb and square?

  28. No damaged material left in place?

  29. Stairs shimmed and nailed in place per specifications?

  30. All windows set, level, visible silicone, window flashing? (enough nails)

  31. No broken glass or damage window or door frames?

  32. All exterior doors level and plumb? (check all reveals)

  33. House is broom clean, all trash in containers, extra material stacked in garage?

  34. Dimensional Lumber Drop

  35. Floor and Roof Turf Drop

Checklist by GoAudits. This checklist is an example: we do not guarantee compliance with the laws applicable to your territory or industry. Seek professional advice to adapt it to your workplace or jurisdiction.

Free PDF

Download the Construction Quality Inspection

By downloading this checklist you agree to the GoAudits privacy policy and terms of service.

NEW! Try generating a custom checklist with our free AI tool:

Easy inspection app for your digital checklists