Boiler Commissioning Checklist

Utilize this Boiler Commissioning Checklist to verify installation, ensure safety protocols, check systems, etc. before the boiler is put into service.

Download as free PDF

Library
Facility & Services
Boiler Commissioning Checklist

General Inspection

Controls

All Systems

Central Heating Mode

Combination Boilers

Domestic Hot Water Mode

Condensing Boilers

All Installations

Is this sample what you are looking for?
Sign up to use & customise this template, or create your own custom checklist:

Checklist by GoAudits.com – Please note that this checklist is intended as an example. We do not guarantee compliance with the laws applicable to your territory or industry. You should seek professional advice to determine how this checklist should be adapted to your workplace or jurisdiction.

Easy inspection app for your digital checklists

Conduct inspections anytime, anywhere - even offline
Capture photos as proof of compliance or areas needing attention
Instantly generate and share detailed reports after the inspections
Assign & track follow-up tasks, view historical trends on a centralized dashboard

Boiler Commissioning Checklist

Utilize this Boiler Commissioning Checklist to verify installation, ensure safety protocols, check systems, etc. before the boiler is put into service.

1. What is the customer's name:

2. What is the telephone Number

3. What is the address:

4. What is the Boiler Make and Model:

5. What is the Boiler Serial Number:

6. Who is it Commissioned by:

7. What is the Gas Safe Register Number:

8. What is the Company Name:

9. What is the Company Address:

1. What is the time and temperature control for heating:

2. Time and temperature control to hot water:

3. Are heating zone valves fitted?

4. Are hot water zone valves fitted?

5. Are thermostatic radiator valves fitted?

6. Is the automatic bypass to the system fitted?

7. Is the boiler interlock provided?

8. What is the programmable room thermostat temperature?

9. What is the optimum start control?

10. Is the combination boiler fitted?

1. Have the systems been flushed and cleaned in accordance with BS7593 and the boiler manufacturer's instructions?

2. What system cleaner was used?

3. What inhibitor was used?

4. Has a primary water system filter been installed?

1. What is the Gas rate?

2. What is the Burner operating pressure?

3. What is the Central heating flow temperature?

4. What is the Central heating return temperature?

1. Is the installation in a hard water area (above 200 ppm)?

2. If yes, and if required by the manufacturer, has a water scale reducer been fitted?

3. What type of scale reducer has been fitted?

1. What is the Gas rate?

2. What is the burner operating pressure (at maximum rate)?

3. What is the cold water inlet temperature?

4. Has hot water been checked at all outlets?

5. What is the water flow rate

1. Has the condensate drain been installed in accordance with the manufacturer's instructions and/or BS5546/BS6798?

1. Does the heating and hot water system comply with the appropriate building regulations?

2. Have the boiler and associated products been installed and commissioned in accordance with the manufacturer's instructions?

3. Is the operation of the boiler and system controls demonstrated to and understood by the customer?

4. Is the manufacturer's literature, including the benchmark checklist and service record, explained and left with the customer?