Baler Safety Checklist

Utilize this Baler Safety Checklist to inspect baler equipment, ensuring proper maintenance, safe operation, and safety standards to prevent accidents.

Download as free PDF

Library
Transport & Automotive
Baler Safety Checklist

Daily Inspection

Lubrication

Electrical System

Bale Monitoring

Safety Devices

Belts And Chains

General Maintenance

Is this sample what you are looking for?
Sign up to use & customise this template, or create your own custom checklist:

Checklist by GoAudits.com – Please note that this checklist is intended as an example. We do not guarantee compliance with the laws applicable to your territory or industry. You should seek professional advice to determine how this checklist should be adapted to your workplace or jurisdiction.

Easy inspection app for your digital checklists

Conduct inspections anytime, anywhere - even offline
Capture photos as proof of compliance or areas needing attention
Instantly generate and share detailed reports after the inspections
Assign & track follow-up tasks, view historical trends on a centralized dashboard

Baler Safety Checklist

Utilize this Baler Safety Checklist to inspect baler equipment, ensuring proper maintenance, safe operation, and safety standards to prevent accidents.

1. Are any signs of damage or wear on baler components checked for?

2. Is the pickup and feed system inspected and cleaned?

3. Is the proper tension and alignment of the baling chamber ensured?

1. Are all fittings and pivot points greased as per the manufacturer's recommendations?

2. Are oil levels in the gearbox and hydraulic system checked and topped up?

3. Are lubrication filters inspected and replaced as needed?

1. Are wiring and connections inspected for any signs of wear or damage?

2. Are safety switches and controls tested to ensure proper functioning?

3. Is the battery voltage checked to ensure it is within the recommended range?

1. Is the proper functioning of bale length and density indicators ensured?

2. Are bale counters checked and calibrated if needed?

1. Are emergency stop buttons and safety guards inspected and tested?

2. Is the functionality of warning lights and alarms verified?

1. Are belts and chains inspected for signs of wear or damage?

2. Are tension and alignment of belts and chains adjusted as necessary?

3. Are worn or damaged belts or chains replaced?

1. Is the baler cleaned and is any debris or residue removed?

2. Are air filters inspected and cleaned?

3. Are cutting knives replaced or sharpened as needed?