GoAudits
Log in Get a demo

Vehicle Lift Inspection Checklist

Use this Vehicle Lift Inspection Checklist for monthly checks on two-post, four-post, scissor and in-ground lifts, covering safety locks, arms, cables, hydraulics and anchoring.

SIGN UP TO USE TEMPLATE
DOWNLOAD FREE PDF
SIGN UP

Vehicle Lift Inspection Checklist



32 questions in 7 sectionsInteractive preview: try the answers

Section 1 of 7 · 5 questions

Lift Details

  1. Lift ID or bay number

  2. Lift type

  3. Make, model and serial number

  4. Rated capacity

  5. Date the next periodic inspection by a qualified lift inspector is due

Section 2 of 7 · 4 questions

Documents And Labels

  1. The periodic inspection by a qualified lift inspector is in date

  2. The rated capacity label is present and legible

  3. Operating instructions and safety labels are posted at the lift

  4. Everyone using the lift is trained and authorized to operate it

Section 3 of 7 · 4 questions

Structure And Anchoring

  1. Columns, runways and platforms are free from cracks, bends and damaged welds

  2. Anchor bolts are present and tight

  3. The concrete around the base plates is free from cracks and crumbling

  4. The overhead beam or crossbar, where fitted, is undamaged and secure

Section 4 of 7 · 4 questions

Arms, Pads And Adapters

  1. Swing arm restraints engage automatically and hold the arms in position

  2. Lifting pads are present and free from tears, cuts and excessive wear

  3. Height adapters and extensions are approved by the manufacturer and undamaged

  4. Telescoping arm stops are present and prevent over-extension

Section 5 of 7 · 5 questions

Locks And Safety Devices

  1. Mechanical safety locks engage at every lock position

  2. Safety locks release fully and evenly on both sides

  3. The overhead shut-off switch, where fitted, stops the lift when activated

  4. Runway wheel stops and approach ramps, where fitted, are in place and secure

  5. The lift holds a load at height without drifting down

Section 6 of 7 · 6 questions

Hydraulics, Cables And Power

  1. Cylinders, hoses and fittings show no hydraulic fluid leaks

  2. The hydraulic fluid level is correct

  3. Equalizer cables or chains are correctly tensioned, with no fraying, kinks or broken strands

  4. Sheaves and pulleys turn freely and show no cracks or excessive wear

  5. Electrical cables, plugs and the power unit are undamaged

  6. Controls are clearly marked and stop the lift when released

Section 7 of 7 · 4 questions

Operation And Bay

  1. The lift raises and lowers smoothly, with both sides moving evenly

  2. The lowering speed is normal, with no jerking or sudden drops

  3. The bay floor is free from oil, debris and obstructions

  4. Overhead clearance is free from pipes, lights and other obstructions

Checklist by GoAudits. This checklist is an example: we do not guarantee compliance with the laws applicable to your territory or industry. Seek professional advice to adapt it to your workplace or jurisdiction.

Free PDF

Download the Vehicle Lift Inspection Checklist

By downloading this checklist you agree to the GoAudits privacy policy and terms of service.

NEW! Try generating a custom checklist with our free AI tool:

AI spark green AI CHECKLIST CREATOR

Easy inspection app for your digital checklists

  • Conduct inspections anytime, anywhere - even offline
  • Capture photos as proof of compliance or areas needing attention
  • Instantly generate and share detailed reports after the inspections
  • Assign & track follow-up tasks, view historical trends on a centralized dashboard
GET A DEMO
START FREE TRIAL
GoAudits care app
Download GoAudits on the App Store
Get GoAudits on Google Play