Tipper Truck Checklist

Use the Tipper Truck Inspection Checklist to check key components like the tipping mechanism, brakes, tires, and hydraulic system to ensure safe operation.

Tipper Truck Checklist



104 questions in 20 sectionsInteractive preview: try the answers

Section 1 of 20 · 3 questions

Body Frame

  1. Are there any cracks in the chassis and subframe?

  2. Is the cabin structure and mounting in good condition?

  3. Is the load body in good condition?

Section 2 of 20 · 4 questions

Rear Axle/ Propeller Shaft

  1. Is the differential oil level correct?

  2. Does the vehicle produce any unusual sounds while running?

  3. Are all UJ cross and center bearings properly functioning?

  4. Is the grease condition in the hub acceptable?

Section 3 of 20 · 4 questions

Fuel Line

  1. Is there any clamping loose or leakage in the fuel line?

  2. Is there any friction with the body of the vehicle?

  3. Is the water drained from the water separator?

  4. Is there any leakage or cap damage in the diesel tank?

Section 4 of 20 · 3 questions

Clutch

  1. Is there any leakage in the clutch, and are the fluids topped up?

  2. Has the oil been replaced at the specified interval (every 6 months or sooner)?

  3. Does the clutch pedal function properly?

Section 5 of 20 · 6 questions

Electrical

  1. Is the battery pole clamp properly fixed?

  2. Is the base mounting secure?

  3. Is the distilled water level checked?

  4. Has the battery gas outline path been cleaned?

  5. Is the terminal cable from the battery properly connected to the self?

  6. Is there any friction with any body parts?

Section 6 of 20 · 6 questions

Suspension

  1. Are all parts, pins, and bushes properly lubricated?

  2. Are there any leaf spring breaks, bolt bush damage, or bolster damage that needs replacing?

  3. Is the V-frame (V bar bush and trunion bush) in good condition?

  4. Is the V-frame bell crank functioning properly?

  5. Is the center bolt properly fixed?

  6. Are there any cracks in the chassis?

Section 7 of 20 · 2 questions

Intake Hose Line/ Adjust Line

  1. Are all hoses free from cuts and leakage, and is clamping done properly?

  2. Is the air cartridge properly fitted?

Section 8 of 20 · 4 questions

Lubrication Oil System

  1. Are the lubrication oil filters in good condition?

  2. Is the lubrication oil cooler functioning properly?

  3. Are the lubrication oil lines and hoses in good condition?

  4. Are the engine mountings secure?

Section 9 of 20 · 6 questions

Tipping System

  1. Is the hydraulic oil level correct?

  2. Is there any leakage in the hydraulic tank and hoses?

  3. Is the tail board properly fixed, and is the locking system functioning?

  4. Is the tipping operation functioning properly?

  5. Are the pipelines free from friction with any parts?

  6. Is the fixing eye end secure?

Section 10 of 20 · 5 questions

Self Starter/Alternator

  1. Is the self-starter and alternator mounting properly fixed?

  2. Are all wires properly tightened?

  3. Is the alternator producing charge correctly?

  4. Is the self-starter operating properly at all times?

  5. Is the V-belt and belt tensioner in good condition?

Section 11 of 20 · 7 questions

Brake

  1. Is the brake adjusted correctly?

  2. Is the diaphragm checked for air leakage, and is the air pipe free from friction with any parts?

  3. Is there any water entering the air tank?

  4. Is the air compressor passing oil properly?

  5. Does the brake pedal function properly?

  6. Is the brake oil level correct, and are there any leaks in the pipes?

  7. Is the exhaust brake functioning properly?

Section 12 of 20 · 8 questions

Front Axle/Steering Gearbox

  1. Is the steering oil level correct?

  2. Is the steering shaft in good condition?

  3. Are all cross joints in good condition?

  4. Is the drag link secure and functioning properly?

  5. Is the tie rod in good condition?

  6. Is the kingpin secure and functioning correctly?

  7. Is the steering system functioning properly?

  8. Is the front hub properly greased?

Section 13 of 20 · 8 questions

Tire

  1. Are the front and rear tires in good condition?

  2. Is the tire pressure within the recommended range?

  3. Are the tire tread and sidewalls in good condition?

  4. Are your tires wearing unevenly?

  5. Do your tires have any lumps, bumps, or cracks?

  6. Are your tires inflated properly?

  7. Are the tire valves in good condition?

  8. Are the wheel nuts properly tightened?

Section 14 of 20 · 4 questions

Fuel Injection System

  1. Are the fuel filters in good condition?

  2. Is there any leakage in the fuel injection pump (FIP) and governor?

  3. Are the injectors leaking?

  4. Are the fuel lines and hoses in good condition?

Section 15 of 20 · 3 questions

Air Intake System

  1. Is the air cleaner checked?

  2. Is the vacuum indicator functioning properly?

  3. Is the turbocharger functioning properly?

Section 16 of 20 · 4 questions

Gear Box

  1. Is the gear oil level correct, and is there any leakage?

  2. Is the gear shifting functioning smoothly?

  3. Is there any uneven noise during gear shifting?

  4. Is the gear shifting cable in good condition?

Section 17 of 20 · 2 questions

Diesel Exhaust Fluid (BSIV & VI)

  1. Is the diesel exhaust fluid level correct?

  2. Is the cap/dipstick in good condition?

Section 18 of 20 · 8 questions

Cooling System

  1. Is there any leakage in the radiator?

  2. Is there any leakage in the intercooler?

  3. Is the coolant level correct?

  4. Is there any leakage or unusual noise from the water pump?

  5. Are there any issues with clamping or hose leakage?

  6. Is the temperature gauge working properly?

  7. Is the gauge functioning correctly?

  8. Are there any loose, cracked, or damaged parts that need attention?

Section 19 of 20 · 9 questions

Light

  1. Are the headlights in good condition?

  2. Are both the low and high beams functioning properly?

  3. Is the brake light functioning properly?

  4. Are the indicators functioning properly?

  5. Is the reverse horn working properly?

  6. Is the horn working properly?

  7. Is the reverse horn wiper functioning properly?

  8. Is the wiper motor and blade functioning properly?

  9. Is the harness free from damage and friction with any parts?

Section 20 of 20 · 8 questions

Engine

  1. Is the engine overheating?

  2. Is the engine oil pressure correct?

  3. Is there any engine blow-by?

  4. Is there any excessive exhaust smoke?

Checklist by GoAudits. This checklist is an example: we do not guarantee compliance with the laws applicable to your territory or industry. Seek professional advice to adapt it to your workplace or jurisdiction.

Free PDF

Download the Tipper Truck Checklist

By downloading this checklist you agree to the GoAudits privacy policy and terms of service.

NEW! Try generating a custom checklist with our free AI tool:

Easy inspection app for your digital checklists