Telehandler Pre Use Inspection Checklist

Use this Telehandler Pre-use Inspection Checklist for daily checks before every shift, from tires, forks and boom to load charts, load moment indicator tests and attachment locks.

Download as free PDF

Library
Construction
Telehandler Pre Use Inspection Checklist

Machine Details

Documents And Competence

Walk-Around (engine Off)

Function Checks

Work Area

Outcome

Checklist by GoAudits.com – Please note that this checklist is intended as an example. We do not guarantee compliance with the laws applicable to your territory or industry. You should seek professional advice to determine how this checklist should be adapted to your workplace or jurisdiction.

Is this sample what you are looking for?
Sign up to use & customize this template, or create your own custom checklist.

NEW! Try generating a custom checklist with our free AI tool:

Easy inspection app for your digital checklists

Conduct inspections anytime, anywhere - even offline
Capture photos as proof of compliance or areas needing attention
Instantly generate and share detailed reports after the inspections
Assign & track follow-up tasks, view historical trends on a centralized dashboard

Telehandler Pre Use Inspection Checklist

Use this Telehandler Pre-use Inspection Checklist for daily checks before every shift, from tires, forks and boom to load charts, load moment indicator tests and attachment locks.

1. Make, model and serial number

2. Hour meter reading

3. Attachment fitted

4. Date the next thorough examination or periodic inspection is due

1. The thorough examination or periodic inspection is in date

2. A load chart for the fitted attachment is in the cab and legible

3. The operator is trained and authorized to operate telehandlers

4. The operator's manual is in the cab

1. Tires, wheels and wheel nuts are undamaged and secure, with correct pressure

2. Engine oil, coolant, fuel and hydraulic oil levels are correct

3. There are no fluid leaks on the machine or the ground beneath it

4. Hydraulic hoses and fittings are free from cracks, chafing and bulges

5. Boom sections and wear pads are undamaged, and extension markings are legible

6. Forks are free from cracks, bends and excessive heel wear

7. Fork retaining pins and attachment locking pins are fitted and fully engaged

8. Stabilizer pads and pins are present and undamaged

9. The cab and ROPS/FOPS structure are undamaged, with glass and mirrors intact

10. The seat belt is undamaged and latches correctly

1. The engine starts with no warning lights or fault codes showing

2. Steering works correctly in every steering mode

3. Service brakes and the parking brake hold the machine

4. Boom raise, lower, extend and retract functions work smoothly

5. The load moment indicator works as set out in the manufacturer's test procedure

6. Frame leveling and the level indicator work

7. Horn, lights, beacon and reverse alarm work

8. Stabilizer interlocks prevent unsafe boom movement until the stabilizers are set

1. The ground is firm and level enough for the planned lifts

2. Overhead power lines and other obstructions are identified and controlled

3. An exclusion zone keeps people clear of the working area

4. People are lifted only in a work platform approved for this machine

1. Defects found are reported to the supervisor before use

2. The machine is taken out of use if any defect affects safety