Installation Audit
Section 1 of 5 · 5 questionsInstaller
Was the installer on time
Was the installer polite
Was the installer clean in appearance
Was the installers vehicle clean
Marks from 1- 5 for the installer (1 being very poor and 5 being very good)
Section 2 of 5 · 8 questionsInstall
Was the unit fitted in the correct place
Was the unit secured correctly
Was the 12v power feed correct
Was the ignition feed correct
Was the earth feed correct
Was all the connections soldered
Was the connections taped correctly
Was the wiring loom secure ( cable tie)
Section 3 of 5 · 2 questionsVehicle
Vehicle condition in general (1-10. 1 being very poor. 10 being very good )
Any information ref vehicle
Section 4 of 5 · 3 questionsPaper Work And Documents
Was the document check completed ok
Was it explained to you about the per and post checks on your vehicle
Was you asked to check your vehicle after the installer completed his work
Section 5 of 5 · 2 questionsConclusion
What marks out of 10 would you give the installer (1 being very poor and 10 being very good plus marks in the middle)
What marks out of ten would you give AP Ltd. (1 being very poor and 10 being very good plus marks in the middle)
Checklist by GoAudits. This checklist is an example: we do not guarantee compliance with the laws applicable to your territory or industry. Seek professional advice to adapt it to your workplace or jurisdiction.
Free PDF
Download the Installation Audit
By downloading this checklist you agree to the GoAudits privacy policy and terms of service.
NEW! Try generating a custom checklist with our free AI tool:
Easy inspection app for your digital checklists
- Conduct inspections anytime, anywhere - even offline
- Capture photos as proof of compliance or areas needing attention
- Instantly generate and share detailed reports after the inspections
- Assign & track follow-up tasks, view historical trends on a centralized dashboard
