- Library
- Health & Safety
- Fire Damper Inspection Checklist
Fire Damper Inspection Checklist
52 questions in 4 sectionsInteractive preview: try the answers
Section 1 of 4 · 25 questionsGeneral Inspection
Is the fire damper installed in the correct location according to the approved plans?
Is the fire damper free of any obstructions that could prevent it from closing properly in case of a fire?
Are the fusible links in good condition and free of any damage or corrosion?
Are the blades of the fire damper able to fully close without any gaps?
Is the fire damper label clearly visible and legible, indicating the manufacturer, model, and rating?
Has the fire damper been tested and maintained according to the manufacturer's recommendations?
Is the fire damper frame securely attached to the ductwork or wall?
Are the inspection ports on the fire damper accessible for testing and maintenance purposes?
Is the fire damper equipped with a smoke detector that will initiate closure in case of smoke detection?
Is there any visible damage to the fire damper such as dents, bends, or rust?
Are there any signs of previous fire damage around the fire damper area?
Is the fire damper easily accessible for inspection and maintenance purposes?
Are there any missing screws or fasteners on the fire damper assembly?
Is the fire damper linkage system functioning properly without any signs of wear or damage?
Are there any gaps or openings around the fire damper that could allow smoke or fire to pass through?
Are the fire damper frame and blades made of the appropriate fire-resistant materials?
Are the fire damper blades able to fully open after closure without any obstructions?
Have any modifications or repairs been made to the fire damper since the last inspection?
Is the fire damper properly sealed to prevent smoke and fire from bypassing the damper?
Is the fire damper interlocked with the building's fire alarm system for automatic closure during a fire event?
Are there any signs of water damage or corrosion on the fire damper components?
Are the access doors to the fire damper clearly marked and easily identifiable?
Is the fire damper compliant with local fire codes and regulations?
Are there any combustible materials stored near the fire damper that could pose a fire hazard?
Has a qualified technician performed a functional test of the fire damper within the last year?
Section 2 of 4 · 9 questionsDamper 1
What is the damper number?
What is the location of the damper?
Is the damper in an open position?
Is the damper in a closed position?
Does the damper operate?
Is the damper cleaned?
Is the damper faulty?
Photo of the damper in open position:
Photo of the damper in closed position:
Section 3 of 4 · 9 questionsDamper 2
What is the damper number?
What is the location of the damper?
Is the damper in an open position?
Is the damper in a closed position?
Does the damper operate?
Is the damper cleaned?
Is the damper faulty?
Photo of the damper in open position:
Photo of the damper in closed position:
Section 4 of 4 · 9 questionsDamper 3
What is the damper number?
What is the location of the damper?
Is the damper in an open position?
Is the damper in a closed position?
Does the damper operate?
Is the damper cleaned?
Is the damper faulty?
Photo of the damper in open position:
Photo of the damper in closed position:
Checklist by GoAudits. This checklist is an example: we do not guarantee compliance with the laws applicable to your territory or industry. Seek professional advice to adapt it to your workplace or jurisdiction.
Free PDF
Download the Fire Damper Inspection Checklist
By downloading this checklist you agree to the GoAudits privacy policy and terms of service.
NEW! Try generating a custom checklist with our free AI tool:
Easy inspection app for your digital checklists
- Conduct inspections anytime, anywhere - even offline
- Capture photos as proof of compliance or areas needing attention
- Instantly generate and share detailed reports after the inspections
- Assign & track follow-up tasks, view historical trends on a centralized dashboard