Daily PPE Inspection Checklist

Use this Daily PPE Inspection Checklist to verify that personal protective equipment from hard hats to safety glasses are in good condition for daily use.

Daily PPE Inspection Checklist



27 questions in 9 sectionsInteractive preview: try the answers

Section 1 of 9 · 3 questions

Hard Hats

  1. Are there visible cracks, dents, or damage on the hard hat?

  2. Is the hard hat worn properly with the bill facing forward and a snug fit?

  3. Is the chin strap used when required?

Section 2 of 9 · 3 questions

Safety Glasses/Goggles

  1. Are the safety glasses or goggles free from scratches, cracks, or damage?

  2. Are safety glasses or goggles worn in designated areas like cutting or grinding?

  3. Are the glasses or goggles properly fitted, ensuring no slipping and full coverage of the eyes?

Section 3 of 9 · 3 questions

Gloves

  1. Are the gloves appropriate for the task, such as cut-resistant or chemical-resistant?

  2. Are the gloves free from tears, holes, or excessive wear?

  3. Are the gloves properly sized for comfort and safety?

Section 4 of 9 · 3 questions

High-Visibility Vests

  1. Are the high-visibility vest and reflective strips clean and intact?

  2. Is the high-visibility vest worn at all times on-site?

  3. Does the vest fit properly, not too loose or too tight?

Section 5 of 9 · 3 questions

Steel-Toe Boots

  1. Are the steel-toe boots in good condition, with no cracks or holes?

  2. Are the non-slip soles intact?

  3. Are the laces or straps secured to prevent tripping?

Section 6 of 9 · 3 questions

Hearing Protection

  1. Are earplugs or earmuffs available when needed?

  2. Are earplugs or earmuffs worn in high-noise areas like machinery or power tools?

  3. Are earplugs properly inserted, and earmuffs fitted snugly?

Section 7 of 9 · 3 questions

Respirators/Masks

  1. Is the correct type of respirator or mask being used for the specific hazard, such as dust or fumes?

  2. Is the respirator or mask properly fitted, with no gaps or leaks?

  3. Are the filters or cartridges in good condition and not expired?

Section 8 of 9 · 3 questions

Fall Protection

  1. Is the harness and lanyard inspected for damage?

  2. Is the fall protection worn and adjusted properly, with straps snug and D-ring centered?

  3. Is the anchorage point verified and secure?

Section 9 of 9 · 3 questions

Additional PPE

  1. Are face shields used with safety glasses, and are they free from damage?

  2. Are knee pads properly fitted and in good condition?

  3. Are coveralls or protective clothing appropriate for the task and free from tears?

Checklist by GoAudits. This checklist is an example: we do not guarantee compliance with the laws applicable to your territory or industry. Seek professional advice to adapt it to your workplace or jurisdiction.

Free PDF

Download the Daily PPE Inspection Checklist

By downloading this checklist you agree to the GoAudits privacy policy and terms of service.

NEW! Try generating a custom checklist with our free AI tool:

Easy inspection app for your digital checklists