Concrete Pre Pour Inspection Checklist

Use the Concrete Pre-Pour Inspection Checklist to ensure quality concrete operations through reinforcement and installation before the pouring process.

Library
Construction
Concrete Pre Pour Inspection Checklist

Notice Of Concrete Operations

Reinforcement And Installation

Formwork, Falsework & Etc

Is this sample what you are looking for?
Sign up to use & customise this template, or create your own custom checklist:

Checklist by GoAudits.com – Please note that this checklist is intended as an example. We do not guarantee compliance with the laws applicable to your territory or industry. You should seek professional advice to determine how this checklist should be adapted to your workplace or jurisdiction.

Easy inspection app for your digital checklists

Conduct inspections anytime, anywhere - even offline
Capture photos as proof of compliance or areas needing attention
Instantly generate and share detailed reports after the inspections
Assign & track follow-up tasks, view historical trends on a centralized dashboard

Concrete Pre Pour Inspection Checklist

Use the Concrete Pre-Pour Inspection Checklist to ensure quality concrete operations through reinforcement and installation before the pouring process.

1. Are the most current set of drawings available?

2. Are the approved submittal and correct mix design available?

3. What is the time available for the inspection date? (enter date/time field)

1. Is blinding/formation level checked before installation?

2. Are covers to concrete, spacers & chairs as per the spec & drawing?

3. Is all reinforcing installed clean and free of debris? (top, bottom & verts)

4. Are dimensions of prefab'd cages and location checked before installing?

5. Is the rebar in its respective position according to the layout & snap tied?

6. Have all the shear links been installed?

7. Are bar size, spacing, & lap lengths fixed as per drawings? (top, bottom & verts)

8. Is the fixer foreman available on the location at the time of inspection?

1. Are line & levels set out at the correct location per the current set of drawings?

2. Are slab penetrations / service pipes, built-in items installed at the correct location per the current set of drawings?

3. Have joint details including waterbars been installed per specification?

4. Is cover to reinforcement checked before formwork?

5. Is the proper form release agent, as defined in the specifications and approved submittals, on site in the work area and readily available in the quantity necessary to cover the forms for the area of slab being placed?

6. Has the temporary work design been approved and the permit signed off?